Oil Injection Systems,Supergrip Bolts

Contact Now

The oil-injection method used for removing the reusable bolts was pioneered by SKF. Originating in Sweden, this technology is based on nearly a half century of experience in the engineering and manufacture of couplings for the marine market, and since the late 1970s, for the utility industry also. Brochure: SKF Supergrip Bolt for rotating flanges.The hydraulic pump is connected to the center of the bolt. Oil is injected to release the bolt from the sleeve. The bolt slides out of the taper and the sleeve immediately regains its original diameter.

 

The latest generation of Supergrip bolt, for example, is based on the oil injection method developed in the early 1940s. The technology has been advanced over the years to develop different connection systems with new mechanisms to save time and money, while increasing safety across a wide range of applications.

 

Bearing Number Bore Dia Outer DIa Width Size
skf OKBS 91 Oil injection systems,Supergrip bolts 10.0000 in 23056 N056 500
skf OKBS 90 Oil injection systems,Supergrip bolts skf OKBS 90 1 pcs Negotiable
skf OKBS 99 Oil injection systems,Supergrip bolts SK 2.407-18 1:12 7316576671777
skf OKBS 97 Oil injection systems,Supergrip bolts 65 mm Cast Iron 680 kgf 32 mm
skf OKBS 98 Oil injection systems,Supergrip bolts 0.8750 in 450 lb 0.3750 in Click here
skf OKBS 96 Oil injection systems,Supergrip bolts 4.9375 in ABMA, ISO 13.5000 to 15.8750 i Tapered Roller
skf OKBS 84 Oil injection systems,Supergrip bolts 22 mm 3.1496 in Uncoated Round
skf OKBS 83 Oil injection systems,Supergrip bolts Uncoated Felt Seal 721673 10.5000 in
skf OKBS 82 Oil injection systems,Supergrip bolts 95 mm 2 Open Covers Contact with Slinger 82.6 mm
skf OKBS 81 Oil injection systems,Supergrip bolts Two-Bolt Flange UCFL200C4HR23 Cast Iron 0.866 in
skf OKBS 80 Oil injection systems,Supergrip bolts 0.3125 in Non-Lubricatable 1.0000 in 1.2205 in
skf OKBS 89 Oil injection systems,Supergrip bolts AS1730, GS.81103 &#x 2430 lbf 0.3 mm Steel
8/9