Metric AH Withdrawal Sleeve

Contact Now

Metric AH Withdrawal Sleeve can be used to mount bearings with a tapered bore onto the cylindrical seat of stepped shafts . The sleeve is pressed into the bore of the bearing inner ring, which abuts a shaft shoulder or similar fixed component. The sleeve is located on the shaft by a nut or an end plate.A wide variety of withdrawal sleeve options are available to you, There are 1,294 suppliers who sells withdrawal sleeve on Alibaba.com, mainly located in Asia. The top countries of suppliers are China, India, from which the percentage of withdrawal sleeve supply is 99%, 1% respectively.

 

The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For larger bearings, large forces are needed to overcome the friction of mating surfaces as the withdrawal sleeve is pressed on to the bearing bore.The hydraulic nut is a tool that helps in assembling/disassembling of bearings with sleeves and shafts assembling and the disassembling. It makes the work easier, allowing an assembling for a longer and useful running without impacts. It uses a manual hydraulic pump to execute heavy duty jobs presenting.

 

Bearing Number Bore Dia Outer DIa Width Size
timken AHX3092G Metric AH Withdrawal Sleeve M 24x160 2 x M 20 30 mm 182.563 mm
timken AHX3288G Metric AH Withdrawal Sleeve Flat Slotted 2225 lbs Heavy Stud
timken AHX3288 Metric AH Withdrawal Sleeve AM51 Open Brass 46 mm
timken AHX3188G Metric AH Withdrawal Sleeve Standard Duty UCFCF200 Cast Iron Four-Bolt Piloted
timken AH24088 Metric AH Withdrawal Sleeve 4547359663860 0.8750 in 3.7500 in -
timken AHX3088G Metric AH Withdrawal Sleeve 76 0.02 KGS 83.058mm Steel
timken AH24184 Metric AH Withdrawal Sleeve Non-Expansion Bearin Contact Seal 3930 RPM RCJ
timken AH3988 Metric AH Withdrawal Sleeve Non-Expansion Bearin 51.6 mm Four-Bolt Flange Round
timken AH3976 Metric AH Withdrawal Sleeve Cast Iron 739080 5.2500 in Lubrication Fitting
timken AH3284G Metric AH Withdrawal Sleeve Tapered Roller Cup S 140.5 mm 22 K2
timken AH3184G Metric AH Withdrawal Sleeve 2.6900 in 2.37 in Two-Bolt Base 6.88 to 7.94 in
timken AH24084 Metric AH Withdrawal Sleeve 0.5000 in Needle Rollers Inch CAMROL (CF 0.3440 in
2/13